Table of Contents
Select a link below to start reading online free!
Front Matter	i-x
Details of Type I Reinforcements	1-2	(skim)
Durability and Performance Issues for Earth Reinforcements	3-3	(skim)
Type I Reinforcements	4-6	(skim)
Type II Reinforcements	7-7	(skim)
Measurement Techniques	8-8	(skim)
Load and Resistance Factor Design (LRFD)	9-9	(skim)
Resistance Factors for Design of Earth Reinforcements	10-11	(skim)
Task 7 - Identify Target Reliability Index for LRFD	12-12	(skim)
Calibration of Resistance Factors for LRFD	13-13	(skim)
Yield Limit State	14-14	(skim)
Resistance Factor Calibration	15-17	(skim)
Chapter 3 - Findings and Applications	18-18	(skim)
Type I - Measured Corrosion Rates	19-19	(skim)
Bias of LPR Measurements	20-21	(skim)
Trends	22-23	(skim)
Metal Loss Models and Reliability	24-27	(skim)
Galvanized Reinforcements	28-31	(skim)
Verification of Monte Carlo Analysis	32-33	(skim)
Plain Steel Reinforcements	34-34	(skim)
Marginal Fill Quality	35-35	(skim)
Type II - Condition Assessment	36-37	(skim)
Rock Bolts	38-40	(skim)
Ground Anchors	41-41	(skim)
Chapter 4 - Conclusions and Recommendations	42-42	(skim)
Recommended Resistance Factors for LRFD	43-44	(skim)
Performance Data	45-45	(skim)
Recommendations for Future Research	46-46	(skim)
Type II Reinforcements	47-47	(skim)
References	48-50	(skim)
Appendix A - Details of Metal Loss Models	51-55	(skim)
Appendix B - Test Protocols	56-68	(skim)
Appendix E - Details of Monte Carlo Simulations and Reliability Analyses	69-69	(skim)
Appendix F - Example	70-98	(skim)
Appendix G - List of Symbols and Summary of Equations	99-105	(skim)
Abbreviations used without definitions in TRB publications	106-106	(skim)

Description

TRB's National Cooperative Highway Research Program (NCHRP) Report 675: LRFD Metal Loss and Service-Life Strength Reduction Factors for Metal-Reinforced Systems explores the development of metal loss models for metal-reinforced systems that are compatible with the American Association of State Highway and Transportation Officials' Load and Resistance Factor Design Bridge Design Specifications.

NCHRP Research Results Digest 364: Validation of LRFD Metal Loss and Service-Life Strength Reduction Factors for Metal-Reinforced Systems summarizes the results of research to further validate some key results of a project that resulted in publication of NCHRP Report 675.

NCHRP Report 675:

LRFD Metal Loss and Service-Life Strength Reduction Factors for Metal-Reinforced Systems

Important Notice:

Citation Manager

Description

Authoring Organizations

Search This Book

SIGN UP FOR...