Below are the first 10 and last 10 pages of uncorrected machine-read text (when available) of this chapter, followed by the top 30 algorithmically extracted key phrases from the chapter as a whole.
Intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text on the opening pages of each chapter.
Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.
Do not use for reproduction, copying, pasting, or reading; exclusively for search engines.
OCR for page 120
Appendix B
Selected Bibliography
Abernathy, W. J., K. B. Clark, and A. M. Kantrow. 1981. The new industrial competition.
Harvard Business Review 59(5):68-81.
Accreditation Board for Engineering and Technology. ABET. 1983. Criteria for Ac-
crediting Programs in Engineering, AB-7. Available from ABET, 345 E. 47th St.,
New York, NY 10017.
Accreditation Board for Engineering and Technology. 1983. Criteria for Accrediting
Programs in Engineering Technology, AB-8. Available from ABET, 345 E. 47th St.,
New York, NY 10017.
Aerospace America. 1984. The manufacturing engineer as a national pnority. AIAA
Bulletin. April:B4.
American Machinist. 1981. CAM: An international comparison. American Machinist.
Special Report 740. November:207-226.
Argoff, N. J. 1984. Fourteen individual case studies on education and training in
computerized manufacturing automation-primary school through university. Paper
to be issued singly by the U.S. Office of Technology Assessment, Washington, D.C.
Argots, N. J. 1984. New technology as a catalyst for American education: A flexible
systems approach to American institutions. Paper commissioned by the American
Enterprise Institute under a grant from the U.S. Department of Commerce.
Ashburn, A. 1984. Is there a place for joint research? American Machinist. January:5.
Ayres, R. U., and S. M. Miller. 1982. Robotics and Conservation of Human Resources.
Technology in Society 4(3):181-197.
Ayres, R. U., and S. M. Miller. 1982. Robotics: Applications and Social Implications.
Cambridge: Ballinger.
Ayres, R. U., and S. M. Miller. 1983. Robotic realities: Near-term prospects and
problems. In R. J. Miller, ea., pp. 28-55.
Baldwin, L. V. 1984. An electronic university. IEEE Spectrum 21(11):108-110.
Barash, M. M. 1980. Computer integrated manufacturing systems. In L. Kops, ea., pp.
37-50.
Behrman, J. N., and R. I. Levin. 1984. Are business schools doing their job? Harvard
Business Review 62(1):140-147.
120
OCR for page 121
SELECTED BIBLIOGRAPHY
121
Bloch, E. 1984. Workplace of the future. IEEE Transactions on Industry Applications
IA-20(1):8-10.
Bollinger, J. G. 1980. Machinery and its control in the computer integrated manufacturing
system. In L. Kops, ea., pp. 51-70.
Bollinger, J. G. 1983. Computer-aided design and computer-aided manufacturing: The
Wisconsin experience. In R. J. Miller, ea., pp. 95-101.
Bolton, B., and J. L. Spanyol. 1984. The place of innovative and commercial skills in
engineering education in the UK. IEEE Proceedings 131A(3):174-178.
Bolton, M. G. 1983. Case Study: The Ben Franklin Partnership Program and Advanced
Technology Center for Northeastern Pennsylvania. Paper submitted to the Workshop
on Research, Technology and Regional Policy, Organization for Economic Cooperation
and Development, Paris, France.
Botkin, J., and D. Dimancescu. 1982. Global Stakes: The Future of High Technology
in America. Cambridge: Ballinger.
Bothn, J., D. Dimancescu, and R. Stata. 1982. High technology, higher education, and
high anxiety. Technology Review. October.
Brooks, H. 1983. Technology, competition, and employment. In R. J. Miller, ea., pp.
115-122.
Burgam, P. M. 1984. Going paperless: A progressive approach. Manufacturing Engi-
neering 93(3):57.
Business-Higher Education Forum. 1984. Corporate and Campus Cooperation: An
Action Agenda. A Report by the Business-Higher Education Forum. Washington,
D.C.: Business-Higher Education Forum.
Business-Higher Education Forum. 1984. The New Manufacturing: America's Race to
Automate. A Report by the Business-Higher Education Forum. Washington, D.C.:
Business-Higher Education Forum.
Center for Public Resources. 1983. Basic Skills in the U.S. Workforce. New York:
Center for Public Resources.
Center for Research and Advanced Study. 1982. Development of a Business Plan for
Starting a Computer-Aided Pattern Grading Service Bureau for the Footwear Industry
in Maine. Project No. 99-26-07125-10 funded by the U.S. Department of Commerce.
Portland: University of Maine.
Chartered Mechanical Engineer. 1984. Action plan for industry conclusions from the
Cambridge manufacturing forum. Chartered Mechanical Engineer 31(9):83-87.
Choate, P. 1982. Retooling the American Work Force Toward a National Training
Strategy. Washington, D.C.: Northeast-Midwest Institute.
Choate, P. 1983. Training implications of the changing economy. Paper presented at the
Conference on Jobs and Skills for the Future, Appalachian Regional Commission,
Jackson, Mississippi, April 12, 1983.
Chubin, D. E., J. D. Roessner, and F. A. Rossini. 1983. Training and Utilization of
Engineering Technicians and Technologists. Atlanta: Technology Policy and Assess-
ment Center, Georgia Institute of Technology.
Commission on Precollege Education in Mathematics, Science and Technology. 1983.
A Revised and Intensified Science and Technology Curriculum Grades K-12 Urgently
Needed for Our Future. Recommendations of the Conference on Goals for Science
and Technology Education Grades K-12. Washington, D.C.: National Science Board.
Committee on Vocational Education and Economic Development in Depressed Areas.
1983. Education for Tomorrow's Jobs. Commission on Behavioral and Social Sciences
and Education, National Research Council. Washington, D.C.: National Academy
Press.
OCR for page 122
122
APPENDIX B
Committee on Women's Employment and Related Social Issues. 1984. Microelectronics
and Working Women, A Literature Summary. Commission on Behavioral and Social
Sciences and Education, National Research Council. Washington, D.C.: National
Academy Press.
Eurich, N. P. 1985. Corporate Classrooms: The Learning Business. Carnegie Foundation
for the Advancement of Teaching. Lawrenceville, N.J.: Princeton University Press.
Fano, R. M. 1982. Lifelong cooperative education. Unpublished manuscript. Department
of Electrical Engineering and Computer Science, Massachusetts Institute of Tech-
nology.
Fenwick, D. C., ed. 1983. Directory of Campus-Business Linkages. American Council
on Education/Macmillan Series in Higher Education. New York: Macmillan.
Footwear Industries of America. 1983. Survey of the state of the art in footwear
manufacturing and identification of priorities and mechanisms to accelerate the
development and application of advanced technology in the U.S. footwear manufac-
turing industry. Technical Assistance Project No. 99-26-07124-10, funded by the U.S.
Department of Commerce.
Foulkes, F. K., and J. L. Hirsch. 1984. People make robots work. Harvard Business
Review 62(1):94-102.
Fuchi, K., S. Sato, and E. Miller. 1984. Japanese approaches to high-technology R&D.
Computer 17(3): 14-18.
Garvin, D. A. 1983. Quality on the line. Harvard Business Review 61(5):64-75.
General Accounting Office. 1976. Manufacturing Technology A Changing Challenge
to Improved Productivity. Report to the Congress by the Comptroller General of the
United States. U.S. General Accounting Office, Washington, D.C.
General Accounting Office. 1983. The Federal Role in Fostering University-Industry
Cooperation. Document # GAO/PAD-83-22. U.S. General Accounting Office, Wash-
ington, D.C.
General Motors Corporation. 1984. Retraining for the Future. 1984 General Motors
Public Interest Report. General Motors Corporation, Detroit, Mich.
Ginzberg, E. 1982. The mechanization of work. Scientific American 247(3):39-47.
Gist, L. G., and R. H. Forbes. 1982. The Information Society: Are High School
Graduates Ready? Denver: Education Commission of the States.
Gitlow, H. S., and P. T. Hertz. 1983. Product defects and productivity. Harvard
Business Review 61(5):131-141.
Glower, D. D., and L. E. Saline, eds. 1982. A Response to Advancing Technologies.
Washington, D.C.: American Society for Engineering Education.
Gold, B. 1980. On the adoption of technological innovations in industry: Superficial
models and complex decision process. Omega 8(5):505-516.
Goldhar, J. D., and D. C. Burnham. 1983. Concept of the manufacturing system: Present
and future approaches. In National Academy of Engineering, pp. 92-104.
Goldhar, J. D., and M. Jelinek. 1983. Plan for economies of scope. Harvard Business
Review 61(6):141-148.
Groff, W. H. 1983. Impacts of the high technologies on vocational and technical
education. In R. J. Miller, ea., pp. 81-94.
Gunn, T. G. 1982. The mechanization of design and manufacturing. Scientific American
247(3): 114-131.
Halberstam, D. 1984. W. Edward Deming, the man who taught Japan about quality,
believes: Yes we can! Parade, July 8, p. 4.
Haller, H. D. 1984. Examples of university-industry-(government) collaborations.
Unpublished manuscript. Cornell University, Ithaca, N.Y.
OCR for page 123
SELECTED BIBLIOGRAPHY
123
Hancock, E. 1983. Academe meets industry: Charting the bottom line. Johns Hopkins
Magazine. August:i.
Hatvany, J. 1980. Possible Consequences of the Intensive Computerization of Industrial
Production and Management: A Scenario and Annotated Bibliography. CP-80-25.
Laxenburg, Austria: International Institute for Applied Systems Analysis.
Hatvany, J. 1984. Intelligence and cooperation in heterarchic manufacturing systems.
Paper presented at the 16th CIRP International Seminar on Manufacturing Systems,
Tokyo, Japan.
Hatvany, J., and F. J. Lettner. 1983. The efficient use of deficient knowledge. Annals
of the CIRP 32(1):423-425.
Hayes, R. H., and S. C. Wheelwright. 1979. Link manufacturing process and product
life cycles. Harvard Business Review 57(1):133-140.
Hayes, R. H., and S. C. Wheelwright. 1984. Restoring Our Competitive Edge: Competing
Through Manufacturing. New York: John Wiley & Sons.
Hayes, R. H., and W. J. Abernathy. 1980. Managing our way to economic decline.
Harvard Business Review 58(4):67-77.
Hetzner, W. A., L. G. Tornatzky, and K. J. Klein. 1983. Manufacturing technology in
the 1980's: A survey of federal programs and practices. Management Science 29(8):951
961.
Holusha, J. 1984. New ways at 2 G.M. plants. New York Times, April 10, D1, D9.
IBM Corporation. 1984. A Summary of University Proposals for Master's Level Curricula
in Manufacturing Systems Engineering. Boca Raton, Fla.: University Programs
Department, IBM Corporation.
Joint Committee on the Economic Report. 1955. Automation and Technological Change.
Hearings before the Subcommittee on Economic Stabilization of the Joint Committee
on the Economic Report, U.S. Congress. Washington, D.C.: U.S. Government
Printing Office.
Joint Economic Committee. 1984. New Technology in the American Machinery Industry:
Trends and Implications. Washington, D.C.: U.S. Government Printing Office.
Kaplan, R. S. 1983. Measuring manufacturing performance: A new challenge for
managerial accounting research. Accounting Review 58(4):686-705.
Kean, T. H. 1983. Education in New Jersey: A blueprint for reform. Speech delivered
by Gov. Kean before a joint session of the legislature, September 6.
Klus, J. P., and J. A. Jones, eds. 1979. Summary and Evaluation, First World Conference
on Continuing Engineering Education, 1979, Mexico City, April 25-27. Madison:
University of Wisconsin-Extension.
Kops, L. 1980. The factory of the future-technology of management. In L. Kops, ea.,
pp. 109-115.
Kops, L., ed. 1980. Towards the Factory of the Future: Emergence of the Computerized
Factory and its Impacts on Society. Papers presented at the Winter Annual Meeting
of the American Society of Mechanical Engineers, Chicago, November 16-21, 1980.
New York: ASME.
Kranzberg, M., and J. Gies. 1975. By the Sweat of Thy Brow, Work in the Western
World. New York: G. P. Putnam~s Sons.
Lawson, J., J. Reidy, G. F. Renner, K. Rosen, and L. Smolak. 1983. Technology for
the factory of the future. In R. J. Miller, ea., pp. 56-67.
Le Cerf, B. H. 1983. GE pumps new life into an aging factory. Iron Age. May 20.
Levin, H. M. 1983. Some general requirements for future work. Paper commissioned
by the Committee on Science, Engineering, and Public Policy of the National Academy
of Sciences, the National Academy of Engineering, and the Institute of Medicine.
Washington, D.C.
OCR for page 124
124
APPENDIX B
Levin, H. M., and R. W. Rumberger. 1983. The low skill future of high tech. Technology
Review 86(6):18-21.
Limprecht, J. A., and R. H. Hayes. 1982. Germany's world-class manufacturers.
Harvard Business Review 60(6):137-145.
Lohr, S. 1984. The Japanese challenge. New York Times Magazine, July 8, p. 18.
Lund, L., and E; P. McGuire. 1983. Business Role in Precollegiate Education: A Survey
of Impacts and Attitudes (Preliminary Report). The Conference Board, Inc., New
York, N.Y.
Lund, R. T. 1983. Testimony before Joint Hearings of the House Committee on Science
and Technology, Science, Research and Technology Subcommittee, and the House
Budget Committee Task Force on Education and Employment, June 9, 1983.
Lund, R. T. 1984. Human issues in new manufacturing technology. Paper presented at
the Ninth Triennial World Congress of the International Federation of Automatic
Control, Budapest, Hungary, July 2, 1984.
Lund, R. T. 1984. Remanufacturing. Technology Review 87(2):19-27.
Lynn, L. 1983. Japanese robotics: Challenge and limited exemplar. In R. J. Miller,
ea., pp. 16-27.
Malstrom, E. M. 1984. Manufacturing computer applications in the factory spur
corresponding efforts in the university. IEEE Spectrum. November:58-59.
Manufacturing Studies Board. 1981. Improving Managerial Evaluations of Computer-
Aided Manufacturing. Assembly of Engineering, National Research Council, Wash-
ington, D.C.
Manufacturing Studies Board. 1981. Reindustrialization or New Industrialization. Min-
utes of a Symposium, January 13, 1981. Assembly of Engineering, National Research
Council, Washington, D.C.
Manufacturing Studies Board. 1984. Computer Integration of Engineering Design and
Production A National Opportunity. Commission on Engineering and Technical
Systems, National Research Council. Washington, D.C.: National Academy Press.
Massachusetts Institute of Technology. 1982. Lifelong Cooperative Education. Report
of the Centennial Study Committee, Department of Electrical Engineering and
Computer Science. Cambridge, Mass.: MIT Press.
McClintock, R. H. 1984. The jobs have changed, not gone. Enterprise 8(4): 16-20.
McFarlan, F. W. (1984) Information technology changes the way you compete. Harvard
Business Review 62(3):98-103.
McGee, T. D. 1978. The decline of engineering in the United States. Engineering
Education. January
McLaughlin, D. B. 1983. Electronics and the future of work: The impact on pink and
white collar workers. In R. J. Miller, ed.
Menges, G., P. Rice, and P. Clegg. 1984. National strategies for training polymer
engineers-comparing German and UK experiences. Plastics and Rubber International
9(5): 11-13.
Merchant, M. E. 1980. The factory of the future technological aspects. In R. L. Kops,
, ea., pp. 71-82.
Merchant, M. E. 1983. Flexible manufacturing systems: Robotics and computerized
automation. In R. J. Miller, ea., pp. 123-135.
Miller, R. J. 1980. The transformation of the factory in the future: Social impacts of
computerized factory. In L. Kops, ea., pp. 99-108.
Miller, R. J. 1983. The human: Alien in the robotic environment. In R. J. Miller, ea.,
pp. 11-15.
Miller, R. J., ed. 1983. Robotics: Future Factories, Future Workers. The Annals, Vol.
OCR for page 125
SELECTED BIBLIOGRAPHY
125
470 American Academy of Political and Social Science. Beverly Hills: Sage Publi-
cations.
Nadler, G., and G. H. Robinson. 1983. Design of the automated factory: More than
robots. In R. J. Miller, pp. 68-80.
National Academy of Engineering. 1981. Academe/Industry/Government: Interaction in
Engineering Education. Washington, D.C.: National Academy Press.
National Academy of Engineering. 1983. U.S. Leadership in Manufacturing. A Sym-
posium at the Eighteenth Annual Meeting, November 4, 1982. Washington, D.C.:
National Academy Press.
National Academy of Engineering. 1984. Guidelines for Engineering Research Centers.
A Report for the National Science Foundation. National Academy of Engineering,
Washington, D.C.
National Academy of Engineering. 1984. The Long-Term Impact of Technology on
Employment and Unemployment. A Symposium Held on June 30, 1983. Washington,
D.C.: National Academy Press.
National Academy of Sciences/National Academy of Engineering. 1982. Science and
Mathematics in the Schools: Report of a Convocation. Washington, D.C.: National
Academy Press.
National Center for Productivity and Quality of Working Life. 1978. Increasing the
Contribution of Engineering Education to Manufacturing Productivity. Proceedings
of the Industry-University Conference on Productivity Improvement, Provo, Utah.
Available from National Technical Information Service, Springfield, Va.
National Council on the Future of Women in the Workplace. 1984. The Invisible Worker
in a Troubled Economy. Eleanor Holmes Norton, Study Chair. The National
Federation of Business and Professional Women's Clubs, Washington, D.C.
Nicholas, I., M. Warner, A. Sorge, and G. Hartmann. 1983. Computerised machine
tools, manpower training and skill polarisation: A study of British and West German
manufacturing firms. In Information Technologies in Manufacturing Processes-Case
Studies in Technological Change, G. Winch, ed. London: Rosendale.
North Carolina State University. 1983. Integrated Manufacturing Systems Institute.
School of Engineering, North Carolina State University, Raleigh.
O'Boyle, T. F. 1984. Brain drain: U.S. basic industries are hindered by loss of scientific
talent. Wall Street Journal, July 27.
Office of Technology Assessment. 1982. Exploratory Workshop on the Social Impacts
of Robotics, Summary and Issues, A Background Paper. Washington, D.C.: U.S.
Government Printing Office.
Office of Technology Assessment. 1984. Computerized Manufacturing Automation:
Employment, Education, and the Workplace. Volume I. Washington, D.C.: U.S.
Government Printing Office.
Office of Technology Assessment. 1984. Computerized Manufacturing Automation:
Employment, Education, and the Workplace. Volume II Working Papers. Available
from the National Technical Information Service, Springfield, Va.
Office of the Under Secretary of Defense for Research and Engineering. 1983. Report
of the DOD-University Forum Working Group on Engineering and Science Education.
U.S. Department of Defense, Washington, D.C.
Plisko, V. W., ed. 1984. The Condition of Education. 1984 Edition. National Center for
Education Statistics, U.S. Department of Education. Washington, D.C.: U.S. Gov-
ernment Printing Office.
Quinn, J. B. 1983. Overview of the current status of U.S. manufacturing: Optimizing
U.S. manufacturing. U.S. Leadership in Manufacturing. A Symposium at the Eight
OCR for page 126
126
APPENDIX B
eenth Annual Meeting, November 4, 1982. Washington, D.C.: National Academy
Press.
Riesenfeld, R. F. 1982. Recommendations for CAD/CAM research directions in the
U.S. Unpublished manuscript. Department of Computer Sciences, University of Utah,
Salt Lake City.
Rosenfeld, S. A. 1983. The future of work for the high school graduate. Paper prepared
for the Committee on Science, Engineering, and Public Policy of the National Academy
of Sciences, National Academy of Engineering, and Institute of Medicine, Washington,
D.C.
Ross, G. H. B., and R. R. Turniansky. 1984. Managing Manufacturing Technologies
Through the 1990's. Conference Report, February 1984. Ann Arbor, Mich.: Industrial
Technology Institute.
Scientific American. 1982. Special Issue on the Mechanization of Work. Vol. 247, No.
3.
Skinner, W. 1980. The factory of the future: Always in the futures.- a managerial
viewpoint. In L. Kops, ea., pp. 83-98.
Skinner, W. 1981. Big hat, no cattle: Managing human resources. Harvard Business
Review 59(5):106-114.
Skinner, W. 1983. Wanted: Managers for the factory of the future. In R. J. Miller, ea.,
pp. 102-114.
Skinner, W. 1984. The taming of lions: How manufacturing leadership evolved 1780-
1984. Research Paper on Technology and Productivity: 75th Anniversary Colloquium
Series. Harvard Business School, Cambridge, Massachusetts.
Smith, K. A. 1984. Industry-university research programs. Physics Today. February.
Society of Manufacturing Engineers. 1984. Directory of Manufacturing Education
Programs in Colleges, Universities, and Technical Institutes, 1984-85. Dearborn,
Mich.: Education Department, SME.
Steele, L. 1983. Manager's misconceptions about technology. Harvard Business Review
61(6): 133-140.
Stimson, R. A. 1984. Industry/government/university cooperation for advancing engi-
neering and management education. Speech delivered April 6 to the Bottom Line
Academia II Conference, Fort McNair, Washington, D.C.
Telchotz, E. 1984. Computer integrated manufacturing. Datamation 30(3):169-174.
Torda, T. P. 1970. Frontiers engineers: New dimensions in education? Technology and
Human Affairs. Summer. Illinois Institute of Technology, Chicago.
Tornatzky, L. G., W. A. Hetzner, and J. D. Eveland. 1982. Fostering the Use of
Advanced Manufacturing Technology. Productivity Improvement Research Section,
National Science Foundation, Washington, D.C.
Tribus, M. 1982. Deming's Way. Report for the Center for Advanced Engineering
Study, Massachusetts Institute of Technology, Cambridge, April.
Tribus, M. 1984. In improving the quality and decreasing the cost of America's defense
is the Department of Defense to be part of the solution or part of the problem? Speech
delivered to the Bottom Line Academia II Conference, April 6, Ft. McNair,
Washington, D.C.
Tribus, M., and lI. H. Hollomon. 1982. Productivity who is responsible for improving
it? Agricultural Engineering 63(7):10-20.
Weekley, T. L. 1983. Workers, unions, and industrial robotics. In R. J. Miller, ea., pp.
146-151.
Willows, P. J. 1984. Computers in manufacturing industry. Chartered Mechanical
Engineer 31(3):26-27.
OCR for page 127
SELECTED BIBLIOGRAPHY
127
Winch, G., ed. 1983. Information Technology in Manufacturing Processes-Case Studies
in Technological Change. London: Rossendale.
Winter, R. E. 1984. Cincinnati Milacron unveils a computer shop floor system. Wall
Street Journal, September 5.
Yoshikawa, H., K. Rathmill, and J. Hatvany. 1981. Computer-Aided Manufacturing:
An International Comparison. Washington, D.C.: National Academy Press.
Representative terms from entire chapter:
business review
