Workshop on Micro Electro Mechanical Systems (MEMS '95) held January 29-February 2, 1995, in Amsterdam, Netherlands. New York: Institute of Electrical and Electronics Engineers.

Della Santa, A., A. Mazzoldi, D. De Rossi, T. Gerlach, M. Kloepzig, and T. Hofman. 1996. Conducting polymer flexural elements for micropump driving. Pp. 96-99 in Proceedings of the 5th International Conference on New Actuators (Actuators '96) held June 26-28, 1996, in Bremen, Germany. Bremen: AXON Technologie Consult GmbH.

Egert, C., and D. Felde. 1995. A Design and Review for Two LIGA Fabricated Micro-Devices: Quarterly Report of the Regional Technology Alliance for High Aspect Ratio MEMS Manufacturing. Presentation to the Technology Reinvestment Program Board at the Defense Advanced Research Projects Agency, Arlington, Virginia, on December 14, 1995.

Ehrfeld, W., and H. Lehr. 1995. Deep x-ray lithography for the production of three-dimensional microstructures from metals, polymers and ceramics. Radiation Physics and Chemistry 45(3): 349-365.

Esashi, M., and Y. Matsumoto. 1991. Common two lead wires sensing system. P. 1089 in Digest of Technical Papers from the International Conference on Solid-State Sensors and Actuators (Transducers '91) held June 24-27, 1991, in San Francisco, California. New York: Institute of Electrical and Electronics Engineers.


Fleischman, A.J., S. Roy, C.A. Zorman, M. Mehregany, and L.G. Matus. 1996. Polycrystalline silicon carbide for surface micromachining. P. 234 in Proceedings of the Institute of Electrical and Electronics Engineers International Workshop on Micro Electro Mechanical Systems (MEMS '96) held February 11-15, 1996, in San Diego, California. New York: Institute of Electrical and Electronics Engineers.


Gilbert, J.R., P.M. Osterberg, R.M. Harris, D.O. Ouma, X. Cai, A. Pfajfer, J. White, and S.D. Senturia. 1993. Implementation of a MEMCAD system for electrostatic and mechanical analysis of complex structures from mask descriptions. Pp. 207-212 in Proceedings of the Institute of Electrical and Electronics Engineers International Workshop on Micro Electro Mechanical Systems (MEMS '93) held February 7-10, 1993, in Fort Lauderdale, Florida. New York: Institute of Electrical and Electronics Engineers.

Guckel, H. 1996. U.S. Patent No. 5,378,583.

Guckel, H., J. Uglow, M. Lin, D. Denton, J. Tobin, K. Euch, and M. Juda. 1988. Plasma polymerization of methyl methacrylate: A photoresist for 3D applications. Pp. 9-12 in Technical Digest of the Institute of Electrical and Electronics Engineers Solid-State Sensor and Actuator Workshop held June 6-9, 1988, on Hilton Head Island, South Carolina. New York: Institute of Electrical and Electronics Engineers.

Guckel, H., J.J. Sniegowski, T.R. Christenson, S. Mohney, and T.F. Kelly. 1989. Fabrication of micromechanical devices from polysilicon films with smooth surfaces. Sensors and Actuators 20(1-2): 117-122.

Guckel, H., T.R. Christenson, K.J. Skrobis, J. Klein, and M. Karnowsky. 1993. Design and testing of planar magnetic micromotors fabricated by deep x-ray lithography and electroplating. Pp. 76-79 in Proceedings of the International Conference on Solid-State Actuators held June 7- 10, 1993, in Yokahama, Japan. Yokohama, Japan: Institute of Electrical Engineers.

Guckel, H., T.R. Christenson, T. Earles, and J. Klein. 1994. Laterally driven electromagnetic actuators. Pp. 49-52 in Technical Digest from the Solid-State Sensor and Actuator Workshop held June 13-16, 1994, on Hilton Head Island, South Carolina. Cleveland Heights, Ohio: Transducer Research Foundation .

Guckel, H., T.R. Christenson, J. Klein, T. Earles, and S. Massoud-Ansari. 1996a. Micro electromagnetic actuators based on deep x-ray lithography. Pp. 21-24 in Proceedings of the 7th International Symposium on Microsystems, Intelligent Materials and Robots held September 27-29, 1995, in Sendai, Japan. Sendai, Japan: Tohoku University.

Guckel, H., P.S. Mangat, H. Emmerich, S. Massoud-Ansari, J. Klein, T. Earles, J.D. Zook, T. Ohnstein, E.D. Johnson, D.P. Siddons, and T.R. Christenson. 1996b. Advances in photoresist based processing tools for three-dimensional precision and micromechanics. Pp. 60-63 in Technical Digest from the Solid-State Sensor and Actuator Workshop held June 2-6, 1996, on Hilton Head Island, South Carolina. Cleveland, Ohio: Transducer Research Foundation.


Hathaway, K.B., and A.E. Clark. 1993. Magnetostrictive materials. MRS Bulletin 18(4): 34-41.

Hayashi, S., N. Ishikawa, and C. Jiordana. 1993. High moisture permeability polyurethane for textile applications. Journal of Coated Fabrics 23: 74-83.

Herbert, J.M. 1985. Ceramic Dielectrics and Capacitors. New York: Gordon and Breach Science Publishers.

Hornbeck, L.J. 1995. Digital Light ProcessingTM and MEMS: Timely Convergence for a Bright Future. Paper presented at the SPIE Micromachining and Microfabrication '95 Conference on October 23, 1995, in Austin, Texas.

Hornbeck, L.J. 1996. DMD Manufacturing Technology. Presentation to the Committee on Advanced Materials and Fabrication Methods for Microelectromechanical Systems at the Beckman Center of the National Research Council in Irvine, California, on February 10, 1996.

Hornbeck, L.J. 1997. Digital Light ProcessingTM for High- Brightness, High-Resolution Applications. Paper presented at the SPIE Electronic Imaging (EI '97) Conference on February 11, 1997, in San Jose, California.

Houston, M.R., R. Maboudian, and R.T. Howe. 1995. Ammonium fluoride anti-stiction surface treatments for



The National Academies | 500 Fifth St. N.W. | Washington, D.C. 20001
Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement