National Academies Press: OpenBook

(NAS Colloquium) Geology, Mineralogy, and Human Welfare (1999)

Chapter: Contaminant Bioavailability in Soils, Sediments, and Aquatic Environments

« Previous: Surface Geochemistry of the Clay Minerals
Page 3365 Cite
Suggested Citation:"Contaminant Bioavailability in Soils, Sediments, and Aquatic Environments." National Academy of Sciences. 1999. (NAS Colloquium) Geology, Mineralogy, and Human Welfare. Washington, DC: The National Academies Press. doi: 10.17226/9470.
×
Page 3365
Page 3366 Cite
Suggested Citation:"Contaminant Bioavailability in Soils, Sediments, and Aquatic Environments." National Academy of Sciences. 1999. (NAS Colloquium) Geology, Mineralogy, and Human Welfare. Washington, DC: The National Academies Press. doi: 10.17226/9470.
×
Page 3366
Page 3367 Cite
Suggested Citation:"Contaminant Bioavailability in Soils, Sediments, and Aquatic Environments." National Academy of Sciences. 1999. (NAS Colloquium) Geology, Mineralogy, and Human Welfare. Washington, DC: The National Academies Press. doi: 10.17226/9470.
×
Page 3367
Page 3368 Cite
Suggested Citation:"Contaminant Bioavailability in Soils, Sediments, and Aquatic Environments." National Academy of Sciences. 1999. (NAS Colloquium) Geology, Mineralogy, and Human Welfare. Washington, DC: The National Academies Press. doi: 10.17226/9470.
×
Page 3368
Page 3369 Cite
Suggested Citation:"Contaminant Bioavailability in Soils, Sediments, and Aquatic Environments." National Academy of Sciences. 1999. (NAS Colloquium) Geology, Mineralogy, and Human Welfare. Washington, DC: The National Academies Press. doi: 10.17226/9470.
×
Page 3369
Page 3370 Cite
Suggested Citation:"Contaminant Bioavailability in Soils, Sediments, and Aquatic Environments." National Academy of Sciences. 1999. (NAS Colloquium) Geology, Mineralogy, and Human Welfare. Washington, DC: The National Academies Press. doi: 10.17226/9470.
×
Page 3370
Page 3371 Cite
Suggested Citation:"Contaminant Bioavailability in Soils, Sediments, and Aquatic Environments." National Academy of Sciences. 1999. (NAS Colloquium) Geology, Mineralogy, and Human Welfare. Washington, DC: The National Academies Press. doi: 10.17226/9470.
×
Page 3371

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

Proc. Natl. Acad. Sci. USA Vol. 96, pp. 3365-3371, March 1999 Colloquium Paper This paper was presented at the National Academy of Sciences colloquium "Geology, Mineralogy, and Human' Welfare," held November 8-9, 1998 at the Arnold and Mabel Beckman Center in Irvine, CA. Contaminant bioavailability in soils, sediments, and aquatic environments SAMUEL J. TRAINA* AND VALERIE LAPERCHE School of Natural Resources, The Ohio State University, 2021 Coffey Road, Columbus, OH 43210 ABSTRACT The aqueous concentrations of heavy metals in soils, sediments, and aquatic environments frequently are controlled by the dissolution and precipitation of discrete mineral phases. Contaminant uptake by organisms as well as contaminant transport in natural systems typically occurs through the solution phase. Thus, the thermodynamic solu- bility of contaminant-containing minerals in these environ- ments can directly influence the chemical reactivity, trans- port, and ecotoxicity of their constituent ions. In many cases, Pb-contaminated soils and sediments contain the minerals anglesite (PbSO4), cerussite (PbCO3), and various lead oxides (e.g., litharge, PbO) as well as Pb2+ adsorbed to Fe and Mn Hydroxides. Whereas adsorbed Pb can be comparatively inert, the lead oxides, sulfates, and carbonates are all highly soluble in acidic to circumneutral environments, and soil Pb in these forms can pose a significant environmental risk. In contrast, the lead phosphates [e.g., pyromorphite, Pb5(PO4~3Cll are much less soluble and geochemically stable over a wide pH range. Application of soluble or solid-phase phosphates (i.e., apatites) to contaminated soils and sedi- ments induces the dissolution of the "native" Pb minerals, the Resorption of Pb adsorbed by hydrous metal oxides, and the subsequent formation of pyromorphites in situ. This process results in decreases in the chemical lability and bioavailability of the Pb without its removal from the contaminated media. This and analogous approaches may be useful strategies for remediating contaminated soils and sediments. The Earth's surface is dominated by the elements O. H. Si, Al, Fe, Ca, Na, K, Mg, Ti, and P. As oxides, these elements account for ~96~o of the total mass of the continental crust (1~. Many of the remaining elements in the periodic table (together with C) are essential for life. Many trace elements are toxic to a wide range of organisms when concentrated and some are toxic to most even at very low concentration. These latter contami- nants are natural substances (with the exception of the tran- suranics) and life on Earth evolved in their presence. Human activity has altered the distribution and forms of these ele- ments, locally increasing their relative toxicities and the fre- quency with which they are encountered by living organisms. At present, various elements are listed as priority pollutants by the U.S. Environmental Protection Agency. Their concen- trations in soils, as well as in surface and ground water, typically are regulated based on total concentration. This system provides a convenient regulatory framework for estab- lishing acceptable levels of contaminant metals and oxoanions in environmental media. However, the environmental science community recognizes that total concentration is not an accurate predictor of the bioavailability or chemical lability of a given contaminant in soils, sediments, or aquatic environ- ments. Rather, the toxicity of a substance, be it an element, an PNAS is available online at www.pnas.org. ion, or a molecule typically is controlled by its chemical and physical state, or speciation (2-10~. Thus, regulations based on absolute concentration may be convenient, but their scientific validity may be in question. Knowledge of the link between chemical speciation and bioavailability is not new, nor did it originate with concerns of contaminant toxicity or environmental pollution. The fields of soil chemistry and soil fertility were, in part, created by the recognition that total soil concentration is a poor predictor of the bioavailability of essential nutrients required for plant growth and food production. This recognition has led to extensive research on the identity and form of nutrient ele- ments in soils and fertilizers with emphasis on predicting their bioavailability. An example is the attention paid to the chem- istry and mineralogy of P in soils and fertilizers (11-13~. Phosphorous is often a limiting nutrient, and supplementa- tion of soil P through the addition of P-containing amend- ments has been practiced at least as early as 287 BC (13~. The apatite mineral family is the most ubiquitous form of P in the Earth's crust, as well as the most geochemically stable one in neutral to alkaline environments (14~. Although used exten- sively as fertilizer, its intrinsically low solubilities makes apatite a very poor choice. Instead, more soluble forms of P commonly are used as amendments to P-deficient agricultural soils. Thus, when serving as a nutrient, the total concentration of P in the agricultural amendment is not as important as the form or availability of the P in the amendment material. In addition to being an essential nutrient, P is an important environmental contaminant. Excessive influx of P into fresh water can lead to increases in primary productivity (photo- synthesis) and accelerated sedimentation (15~. This process, cultural eutrophication, can result in the growth of deleterious species of algae, depletions of available O2, and production of toxic metabolic products by a number of phytoplankton. Numerous studies of fresh-water systems have shown the inseparable link between the chemical form or species of P entering lakes and the potential for P-induced eutrophication (16~. Indeed, bioassay measurements indicated that P present as apatites is much less bioavailable to planktonic algae than dissolved phosphate (16~. Presumably, the lower bioavailability of apatites is a result of their low solubility in neutral and alkaline environments (as also in similar agricultural environ- ments). That apatite as well as other solid-phase forms of P are less bioavailable than dissolved P strongly influenced the institutional controls implemented for the protection of the Great Lakes of North America. Initial efforts were focused on the removal of dissolved P from wastewater discharges fol- lowed by a later effort to reduce sediment loads from agricul- ture. The latter is dominated by particulate P (16). Abbreviations: XRD, x-ray diffraction; SEM, scanning electron mi- croscopy; AFM, atomic force microscopy. *To whom reprint requests should be addressed. e-mail: Traina.1@ osu.edu. 3365

3366 Colloquium Paper: Traina and Laperche These examples illustrate two important points relevant to contaminant chemistry and ecotoxicology. First, a substance beneficial in one environment (e.g., bioavailable P in an agricultural soil) may be deleterious in another (e.g., bioavail- able P in lake waters). Second, the specific form of a substance has a profound impact on its bioavailability with solid-phase forms (including sorbed species) generally controlling its bio- availability in natural environments. It is clear that dissolved substances are generally more labile and bioavailable than solids, but can one generalize about the relative bioavailabili- ties of two or more different solids, each containing the same element of interest? As discussed below, this question may be assessed by considering the solubility products of the solids. The relationship between solubility and bioavailability of contaminants has important ramifications for environmental risk assessment and environmental remediation. Adoption of an environmental impact or bioavailability mode of contam- inant regulation can on be accomplished if a formal assessment indicates that some parameter other than total concentration (e.g., solubility) controls the bioavailability and ecotoxicology of that substance. Concomitantly, recognition that bioavail- ability can be tied to solubility rather than total concentration allows one to consider remediation strategies based on in situ reductions solubility of a contaminant, rather than its complete removal. Solubility and the Solubility Product The assertion that the bioavailability of a given element in soils or sediments is controlled by its solid-phase form rests on the assumption that uptake of a contaminant by a target organism happens through the solution phase. This is a safe assumption to make when one considers the uptake of an ion by plants. It may be less appropriate for the uptake of contaminants by fauna where ingestion or inhalation of particulate material can represent a significant mechanism of contaminant exposure. Nevertheless, with the possible exception of radiological dam- age, toxic responses to a contaminant generally require ab- sorption by biological tissue. Even for ingestion, the relative bioavailabilities and toxicities of different mineral forms of a given element are subject to their relative solubility (17, 18~. This phenomenon may in part be caused by the linkage between intrinsic solubility and relative dissolution rates, as discussed below. In any event, the equilibrium solubility of a given mineral and its dissolution kinetics profoundly affect the bioavailability and chemical lability of its constituent ions. For a given solid, MxL,, a general dissolution reaction is: H20 MxLy~s) ~ xMY+(aq) + yLX-aqj, [11 where MY+(aq) and LX-(aq) are the aqueous metal and ligand ions M and L, respectively. An equilibrium constant for this reaction is defined as: K l MY ~ ILL is fMx~] [21 where ~ ~ denote activities. A solubility product is then defined as: K K [3] If the solid MXLy is in its standard state then [MXIg,] becomes unity and Ksp becomes: KSp = tMY+]X ~LX-]y . [4] For a fixed activity of LX-, the solid with the smallest numerical value of Ksp will support the smallest equilibrium activity of Proc. Natl. Acad. Sci. USA 96 (1999) MY+. Commonly, the toxicity of metal M is directly propor- tional to the activity of the free metal ion, MY+, regardless of whether MY+ or some hydrolytic species, or complex ion-pair is the most toxic form of M. This relationship results from the direct relationship between the activity of MY+ and all other species of dissolved M (including complex ion-pairs and hy- drolytic species). Therefore, the least toxic solid form of M will have the smallest aqueous equilibrium activity of MY+. Anal- ogously, the most toxic solid will be that which supports the largest aqueous equilibrium activity of MY+. This so-called solubility product model of contaminant availability has several limitations. First, organisms represent intrinsically dynamic systems, and their reaction with the surrounding environment is typically far from equilibrium. Second, adsorption reactions and mass transfer constraints may lower the aqueous activity of M below that supported by any known phase of M. The formation of solid solutions also may lower the aqueous activity of M below that supported by any known pure phase of M. Finally, the solubility product of MXL:, is expressed in terms of its dissolution into its constitutive ions. It does not account for additional side reactions that could lead to consumption of L. Such side reactions could alter the apparent relative solubilities of different M-containing solids. With the exception of the first proviso (local equilib- rium) the other limitations of the solubility product model can be addressed by substitution of the appropriate equilibrium constants to account for desorption from particulate surfaces, dissolution of solid solutions, and/or incongruent dissolution reactions. What then, can one do about the assumption of local equilibrium? The law of detailed balancing (19) indicates that to a first approximation the relative dissolution rates of a series of solids with identical specific surface areas, each containing metal M, will be inversely proportional to their solubility products, (when corrected for side reactions with the surrounding solu- tion). Obviously, in natural systems solids of different chemical composition rarely have identical specific surface areas. Ad- ditionally, some solids may undergo surface controlled disso- lution under the same conditions that promote diffusion controlled dissolution reactions for other solids containing M. Nevertheless, wide differences in mineral solubilities do pro- duce differential dissolution rates among multiple solids, each containing the metal M. This assertion is true for virtually all aqueous solutions, including surface and ground waters and soil solutions, as well as gastrointestinal tracts. The net out- come is that the solids with greater solubilities generally can be characterized as having greater dissolution rates, resulting in greater bioavailabilities and chemical [abilities of their con- stituent elements. Recognition that the solubility product serves as a relative constraint on the reactivity and potential toxicity of metals and oxoanions in surficial environments provides a strategy for environmental treatment. Often, it is not possible to remove toxic elements from contaminated soils and sediments. In these cases, inducing changes in the mineralogy of a contam- inant (e.g., conversion of a metal-carbonate to a metal- phosphate) may allow one to significantly lower its solubility and its corresponding ecotoxicity. The remainder of this paper will examine the feasibility of this approach with emphasis on the formation of stable Pb precipitates in contaminated soils. Pb-Phosphates The orthophosphate ion forms sparingly soluble solids with several toxic metals, including Cd, Zn, Pb, and several of the actinides. Much research has explored the utility of using phosphates to reduce the mobility and bioavailability of these metals in contaminated environments as well as in a number of waste forms. A full discussion of all of these metals and all of these applications is beyond the scope of this paper. For

Colloquium Paper: Traina and Laperche brevity we focus on the formation and bioavailability of Pb-phosphates. The Pb-phosphates are some of the most insoluble Pb(II)- solids known to form under surficial geochemical conditions (Table 1~. At standard state, the Pb-phosphates are at least 44 orders of magnitude less soluble than galena (PbS), anglesite (PbSO~), cerussite (PbCO3), litharge (PbO), and crocoite (PbCrO4), Pb-solids common to soils contaminated by mining and smelting activities and by paint (20, 21~. Nriagu (22-24), Santillan-Medrano and Jurinak (25), and Sauve et al. (26) suggest that Pb-phosphate phases may control the solubility of Pb in noncalcareous soils. Indeed, in oxidized, noncalcareous environments, Pb-phosphates should form at the expense of other Pb solids if sufficient P is present Natural Pb-phosphate minerals have been identified in soils impacted by the weath- ering of Pb ores (17, 20, 27, 28) as well as in roadside soils presumably contaminated by automobile emissions, and in urban soils (29~. Often these natural Pb-phosphates are present as Pb-Ca solid solutions (17, 27-29) as predicted by Nriagu (24~. However, essentially pure Pb-phosphates also have been identified in contaminated soils (20~. In light of their intrinsically low solubilities and their natural occurrence in some contaminated soils, effort has been given to inducing the formation of Pb-phosphates in Pb-contami- nated soils and soil materials through the addition of P. The treatment of Pb-contaminated soils with additions of highly soluble forms of orthophosphate as (Na2HPO4 or KH2PO4) can reduce the bioavailability of Pb as assessed by an in v~tro gastrointestinal assay (30, 31) as well as induce the formation of Pb-phosphate particles (32~. Unfortunately, treatment with highly soluble P increases the risk of offsite P migration (29, 33) and eutrophication of surrounding surface waters. An alter- nate approach is to use a lower solubility source of P such as apatite. These Ca-phosphates are prevalent as accessory min- erals in igneous rocks and as low-temperature precipitates in soils and sedimentary environments. Apatite Chemistry The hexagonal (P63/m) crystals of the apatite group tCas(PO4~3X] comprise three dominant end-members, where X = 0H in hydroxylapatite, F in fluorapatite, and Cl in chlorapatite. The solubility product constants of the most common hydroxyl and fluoro end members are 10-3 ~ and 10-25, respectively. Apatites of geologic origin are dominated by the fluorapatites, exhibiting inhomogeneous solid solution with Cl, OH, and CO3 (11, 34, 35~. The Ca in apatites resides in two distinct crystal sites (Fig. 1~. The Ca(1) site is coordi- nated to nine oxygens. The Ca(2) site is comprised of CaO5X octahedron. In fluor- and hydroxylapatites an additional weak bond to O exists (0.15 valence units), resulting in CaOsX(O) polyhedra (34~. Natural apatites exhibit extensive substitution with the in- corporation of K, Na, Mn, Ni, Cu. Co, Zn, Sr, Ba, Cd, Sn, Y. and rare earth elements in the Ca sites (refs. 11, 34, and 36, and Table 1. Solubility products of selected Pb minerals Mineral Formula Log Ksp* Litharge Anglesite Cerussite Pyromorphite Hydroxypyromorphite Fluoropyromorphite Bromopyromorphite Corkite Hindsalite Plumbogummite PbO PbSO4 PbCO3 Pbs(PO4~3C1 Pb5(PO4~30H Pbs(PO4~3F Pbs(PO4~3Br PbFe3(PO4) (SO4)(OH)6 PbAl3(PO4)(SO4)(OH)6 PbAl3(PO4)2(0H)s H20 *Data from ref. 20 and references cited therein. Proc. Natl. Acad. Sci. USA 96 (1999J 3367 Catl) Cat2) FIG. 1. Projection of the hydroxylapatite structure down the c axis, as well as the two cation sites in hydroxylapatite. Structural data from ref. 52. Atom sizes are not to scale. references therein). Substitution occurs at both Ca sites, depending on the ionic radius of the ion in question. Reaction of Dissolved Pb with Apatites Apatites have been examined extensively for use in the removal of toxic metal ions from wastewater and aquatic solutions (33, 37-51~. Mechanisms of metal uptake vary with identity of the sorbate, the sorbent, and the solution conditions. From changes in solution composition, powder x-ray diffraction (XRD) patterns, and scanning electron micrographs, Ma et al. (33) described the reaction of dissolved Pb2+ with hydroxy- lapatite by the sequential dissolution and precipitation reac- tions: Cas(PO4~30H + 7H+ ~ SCa2+ + 3H2PO4 + H2O [5] sPb2+ + 3H2PO4- + H2O ~ Pb5(PO4~30H + 7H+, [6] where Pbs(PO4~30H is the mineral hydroxypyromorphite. The overall reaction: Cas(PO4~0H + sPb2+ ~ Pbs(PO4~30H + SCa2+ [7] 12.9 -7.7 - 12.8 -84.4 -76.8 -71.6 -78.1 112.6 -99.1 -99.3 is exergonic with a standard state Gibbs energy change of -137.08 kJ mol-i (51~. The pyromorphite group also includes the mineral pyromorphite tPbs(PO4~3Cl], fluoropyromorphite tPbs(PO4~3F], bromopyromorphite tPbs(PO4~3Br], and various arsenate and vanadate analogs. The solubility of the pyromor- phites decreases fluoropyromorphite > hydroxypyromor- phite ~ bromopyromorphite > pyromorphite, with log Ksp of -72, -77, -78, and -84, respectively. The pyromorphites are isostructural with the apatites. Discrete products of Pb reactions with hydroxylapatite are detectable by powder XRD and by scanning electron micros- copy (SEM) in model aqueous systems when the initial aque- ous Pb concentrations are >5 mg liter -~ and the initial pH ranges from 3 to 7 (33~. Under these conditions, discrete Pb-bearing solids (identified by XRD as hydroxypyromor- phite) form in less than 10 min. They have different crystal

3368 Colloquium Paper: Traina and Laperche habits than the original hydroxlyapatites and do not contain Ca (within the detection limits of energy dispersive x-ray analysis). Apparently they form according to the sequential reactions described in Eqs. 5 and 6 and not from ion substitution of Pb for the Ca in the apatite particles (334. Fourier transform IR spectroscopy and x-ray absorption fine structure spectroscopy indicate that the reaction of <1 mg Pb literal with hydroxy- lapatite still results in the formation of hydroxypyromorphite (52~. Ex situ and in situ atomic force microscopy (AFM) studies of Pb-reacted hydroxylapatite indicate that when initial condi- tions are far from equilibrium (>1 mg Pb liter-i, pH = 6), pyromorphite can nucleate homogeneously as a result of interactions between dissolved Pb and phosphate (50, 51~. In situ, AFM measurements of Pb solutions reacting with hy- droxylapatite particles, showed only "clean" apatite surfaces without coatings of pyromorphite crystals (51~. Nevertheless, pyromorphite crystals were found in the outflow from the AFM liquid cell, suggesting that homogeneous nucleation had occurred. Additionally, the presence of pyromorphite needles atop the AFM cantilever (Fig. 2) was consistent with precip- itation of the Pb-phosphates in solution and not on the surfaces of the hydroxylapatite (514. The initial composition of the solution phase influences the interactions of dissolved Pb with apatites. Ma et al. (42) examined the effects of NO3, Cl, F. S04' and CO3 on the immobilization of aqueous Pb by hydroxylapatite. Pb concen FIG. 2. Pyromorphite crystals formed from the reaction of dis- solved Pb with hydroxylapatite. (A) An ex site tapping mode AFM image of effluent from the AFM fluid cell. Scan size = 661 rim on a side. (B) SEM image of pyromorphite crystals deposited atop the AFM cantilever after reaction of dissolved Pb with hydroxylapatite in an AFM liquid cell. [Reproduced with permission from ref. 54 {f:onvrirrht 1998, Elsevier Science).] Proc. Natl. Acad. Sci. USA 96 (1999) "rations were reduced from an initial 5-100 mg liter-i to <15 ,ugliter-~ (the Environmental Protection Agency's drinking water limit for Pb) except at very high concentrations of CO3. Hydroxylapatite was transformed to hydroxypyromorphite in the presence of NO3, S04, and CO3, to pyromorphite after reaction with PbCl2, and to fluoropyromorphite after reaction with PbF2. These reaction products were identified by XRD and SEM. Ma et al. (53) explored the interactions of dissolved Pb with natural fluorapatites and carbonated fluorapatites. These sol- ids varied in their capacity to remove aqueous Pb (from 39% to 100%~. The fraction of Pb removed was not related to the initial surface areas of the apatite particles, but rather to their dissolution rates. Fluoropyromorphite and hydrocerussite were the principal Pb phases formed in these experiments. The exact composition of the products formed by the reaction of aqueous Pb with apatite depends on the solution pH. In the regime of pH 3.1-6.2, Chen et al. (49) found that mixtures of dissolved Pb and carbonate-containing fluorapa- tite reacted to form fluoropyromorphite by the coupled reac- tions: Cas~po4~3-x~co3)xF~+x + 6H+ ~ SCa2+ + (3-x)H2PO4- + xH2CO3O + (1 + xjF- [8] sPb2+ + 3H2PO4- + F- ~ Pb5(PO4~3F + 6H+. [9] At pH 6.6-6.8, a mixed hydroxylated fluorapatite forms. Ca5(po4~3-x~co3)xF~+x+ (6 - x)H ~ 5Ca2+ + (3-x)H2PO4- + xHCO3- + (1 + xjF- [101 SPb2+ + 3H2PO4- + (F-,OH-) ~ Pb5(PO4~3(F,OH) + 6H+. [111 At circumneutral pH, hydrocerussite and carbonated hvdroxvl fluoropyromorphite form by the reactions: Castpo4~3-x~co3)xF~+x + (6 - x)H+ ~ ,, _ ., 5Ca2+ + (3 - x)H2PO4- + xHCO3- + (1 + xjF- [12] 3Pb2+ + 2HCO3- + 2H2O ~ Pb3(CO3~2(OH)2 + 4H+ [13] 5Pb2+ + 3(H2PO4-,HCO3-) + (F-,OH-) ~ Pb5(PO4,CO3~3(F,OH) + 6H+. [14] Finally, at pH 10.7-11.9, the reaction products consist of hydrocerrusite, hydroxypyromorphite, and lead oxide fluoride (49~. Formation of the lead oxide fluoride is described as: 2Pb2+ + H2O+2F--= Pb2OF2 + 2H+. [15] Competition with other metal ions also influences the reac- tions of aqueous Pb with apatites. At initial solution concen- trations of <20 mg liter-i, dissolved Zn, Cd, Ni, Cu. Fe(II), and Al have no discernible effect on the immobilization of 20 mg Pbliter-i, by hydroxylapatite. Additionally, significant quantities of these metals also are removed from solution (43~. Cadmium and Zn also have been shown to have no influence on influence the uptake of Pb by carbonated fluorapatite (49~. In these latter experiments, the initial concentrations of dis- solved Cd, Zn, and Pb all were equimolar. When the concentration of competing metals far exceeds that of Pb, (M/Pb = 7:1, where M = Zn, Cd, Ni, Cu, Fe(II), or Al and dissolved Pb = 20 mg liter-~) the interactions of Pb with hydroxylapatite can be significantly inhibited (43~. Ma et al. (43) reported dissolved Cu was the most effective in inhibiting Pb immobilization by hydroxylapatite, followed by Fe(II), Cd, Zn, Al, and Ni. In all cases, hydroxypyromorphite

Colloquium Paper: Traina and Laperche was the only reaction product detected by XRD besides hydroxylapatite. The intensities of hydroxypyromorphite XRD peaks decreased with increased concentrations of competing metals. Inhibition of hydroxypyromorphite formation was positively correlated with the solubility of known M- phosphates; however, no metal-phosphates other than hy- droxylapatite could be detected with XRD or SEM (43~. Additionally, geochemical calculations indicated that the so- lutions were all undersaturated with respect to known Zn-, Cd-, Ni-, Cue, Fe(II)-, or Al-phosphate phases. The nature of this inhibition is not known, but it possible that these metal ions passivated the surfaces of the apatite, through the for- mation of sorbed, or surface-precipitated species. Reaction of Apatites with Sorbed and Solid-Phase Pb The pyromorphites are much less soluble than the other Pb-solids commonly present in terrestrial and aquatic envi- ronments (Table 14. Thus, it is expected that if sufficent soluble P is present, pyromophites will form at the expense of the "native" Pb-solids (including both adsorbed and precipitated Pb). Ma et al. (33) observed XRD-detectable hydroxypyro- morphites after the reaction of hydroxylapatite with Pb- saturated cation exchange resins with hydroxylapatite (note, the initial concentration of dissolved Pb was <1 mgliter-~. SEM showed that the spherical particles of the exchange resin were coated with hexagonal hydroxypyromorphite needles after they were reacted with apatite. Precipitates were not detectable on the surfaces of the reacted apatite particles. Zhang et al. (54) observed the formation of pyromorphite when hydroxylapatite particles were reacted with goethite suspensions containing sorbed Pb. In these experiments, the Pb-treated goethites and the apatite particles were separated by dialysis membranes. Hexagonal pyromorphite crystals formed on the inside surfaces of the dialysis membranes, indicating that nucleation on the apatite surface is not required for pyromorphite precipitation as was also suggested by Lower and coworkers (50, 51~. Consistent with thermodynamic predictions hydroxypyro- morphite forms at the expense of more soluble Pb-minerals when they are exposed to apatites. Laperche et al. (21) found XRD- and SEM-detectable hydroxypyromorphite when pure systems of PbO and cerussite each were reacted with hydroxy- lapatite at pH 5, 6, and 7. Decreased pH caused more rapid reaction rates with greater loss of the parent phases and increased formation of hydroxypyromorphite (Fig. 3~. Appar- ently dissolution of the apatite and/or the original Pb-phases was rate limiting. In all of these cases, initial precipitation of pyromorphite or hydroxypyromorphite quickly reduced the concentration of dissolved Pb. Growth of the Pb-phosphate crystals required continued dissolution of the apatite particles, desorption of adsorbed Pb from the surfaces of the exchange resin and the goethite, and dissolution of the PbO and cerussite phases. The driving force for these dissolution and desorption reactions was formation of the Pb-phosphates. Reactions of Apatites with Pb-Contaminated Soils The interactions of apatites with soil Pb are similar to those observed in model solutions and laboratory mixtures of pure solids. When added to a soil slurry from an automobile battery cracking facility, hydroxylapatite caused a 99% reduction in dissolved Pb (from 3,370 to 36 ~g liter-~) over a 5-h period (334. Similarly, amendment of Pb-contaminated soils with natural fluorapatites reduced the leachability of Pb in soil columns (53) and decreased its extractability by neutral salts (MgCl2) and weak acids (Na-acetate) (55, 56~. Laperche et al. (21) used direct physical methods to show apatite-induced formation of pyromorphites in soil slurries. Proc. Natl. Acad. Sci. USA 96 (1999) 3369 FIG. 3. SEM images of the reaction products of hydroxylapatite and solid-phase forms of Pb (cerussite) at pH 5 (A) and pH 7 (B). "Reproduced with permission from ref. 21 (Copyright 1996, American Chemical Society).] When synthetic hydroxylapatite was added to a soil contami- nated by paint residues, these investigators observed decreases in the intensity of the XRD peaks associated with the "native" Pb (cerussite) and appearance of peaks attributed to pyro- morphite. The rate and magnitude of changes in the XRD peaks was greater at pH 5 than 7, presumably because of the more rapid dissolution of the cerussite and the hydroxylapa- tite. Effects of Apatites on the Bioavailability of Pb in Contaminated Soils The conversion of soil or sedimentary Pb from highly reactive, chemically labile forms to less reactive solids should result in concomitant decreases in bioavailability. Chlopeka and Adri- ano (57) evaluated this hypothesis by adding natural apatite from North Carolina to a soil amended with varying amounts of Pb-containing flue dust. These materials then were used as potting mixes in glass-house experiments that produced a single crop of maize (Zea mays, var. Pioneer 3165) followed by single crop of barley (Hordeum vulgare, var. Boone). Apatite amendment resulted in decreases in extractable Pb from the soil as well as decreases in tissue Pb concentrations in both crops. Laperche et al. (58) investigated the use of apatite minerals to induce in situ formation of Pb-phosphates in contaminated soil and determined the impact of apatites on Pb uptake by plants. Subsamples of a Pb-contaminated soil (containing 37,026 mg Pb kg-i soil from paint residues) were mixed with sufficient quantities of either synthetic hydroxylapatite or natural fluorapatite to convert 33~o, 66%, 100~o, and 150~o of the native soil Pb to either pyromorphite or hydroxypyromor- phite. These materials then were planted with sudax grass (Sorghum bicolor L. Moench) a hybrid of sorgum (Sorghum vulgare L. Moench) and sudan grass (`Sorghum vulgare var. sudanese). In all cases, hydroxylapatite amendments decreased the concentrations of Pb in the above-ground biomass (shoots)

3370 Colloquium Paper: Traina and Laperche (by 92-98%) relative to the unamended soil. Fluorapatite- induced reductions in the concentration of Pb in the shoots ranged from 87% to 96%. The effect of apatite amendments on the Pb concentration in the roots was much different. For both apatites, the lowest concentrations of Pb within the root tissue were associated with the smallest levels of apatite amendments. Increased levels of apatite addition corre- sponded to increases in the quantity of Pb associated with the roots. At the greatest levels of apatite amendment, the root Pb actually exceeded that found in the unamended soil. Examination of the root surfaces with SEM, energy disper- sive x-ray analysis, and XRD analysis of root-associated par- ticles indicated the presence of Ca-substituted pyromorphites on those plants grown in the apatite-treated soils (Fig. 44. Similar particles were not found on the root surfaces of sudax grown in the unamended soils; nor could similar particles be found in the bulk soil after reaction with apatite. Apparently, addition of apatite to the contaminated soil resulted in pre- cipitation of pyromorphite particles on the exterior of the root surfaces. Local acidity within the rhizosphere may have en- hanced the local dissolution of apatite grains, facilitating pyromorphite precipitation. Cotter-Howells and Caporn (32) also observed the precipitation of Ca-substituted pyromor- phites on plant roots (Agrostis capillaris) grown on Pb- contaminated soils. In this case pyromorphite precipitation may have resulted from root-exudate phosphatase, causing increased local concentrations of phosphate in the rhizo- sphere. In any event, the formation of pyromorphite likely decreased the bioavailability of Pb. Soils, surface sediments, and surficial aquatic environments are open, dynamic systems best characterized as mixtures of meta-stable solids. It is safe to say that these systems never attain absolute thermodynamic equilibrium, and one can ex- pect to find multiple forms of a given element present. Thus, the bioavailability and chemical lability of toxic elements in these systems are transient properties that are controlled by the reaction dynamics and the total quantity of the most reactive forms of these elements present. Ideally, treatment technologies would facilitate the complete conversion of a toxic element (e.g., Pb) from all pre-existing forms to the most geochemically stable phase; but as we know, kinetic constraints will prevent this from happening. Fortunately, decreases in the chemical reactivity of and bioavailability of a given element (e.g., Pb) can be accomplished by elimination of the most reactive forms (58~. Conclusions Human activity on this planet has altered the distribution and form of various elements in the periodic table. Often these activities have converted many potentially toxic metals from ~_ ~_ "' - ~ ~43~.: FIG. 4. SEM micrograph of sudax root grown in Pb-contaminated 22. soil m~xed with hydroxylapatite. Note the pyromorphite crystals on the 23. root. 24. Proc. Natl. Acad. Sci. USA 96 (1999J nonreactive, geochemically stable solids into forms that are more soluble and bioavailable, increasing their effective tox- icity. Fortunately, it is often possible to reverse this process, transforming reactive forms of toxic metals to less labile species through appropriate precipitation reactions. Although such an approach does not remove the element in question from the biosphere, it can significantly reduce its bioavailabil- ity. In many instances, this approach may be a practical alternative to more invasive methods of environmental resto- ration (e.g., excavation and removal of contaminated materi- als). In the event that more extensive treatment is chosen, geochemical stabilization may still be desirable as a rapid response treatment or to increase the chemical stability of excavated materials in landfill environments. This approach is not limited to Pb, nor is it only possible to induce precipitation of phosphates. Extensive research has been conducted on various treatment technologies designed to remove toxic ions from contaminated waters or to stabilize these elements in soil waste materials or contaminated soils and sediments (5~. Many of these efforts involve the formation of geochemically stable solids through precipitation and/or adsorption reactions. In essence, these methods attempt to close the circle, converting labile forms of toxic elements into less reactive solids more consistent with long-term geochemi- cal equilibrium. 2. Krauskopf, K. B. & Bird, D. K. (1995) Introduction to Geochem- istry (McGraw-Hill, New York). Hayes, K. F. & Traina, S. J. (1998) in Soil Chemistry and Ecosystem Health, ed. Huang, P. M. (Soil Sci. Soc. Am., Madison, WI), pp. 45-84. 3. Newman, M. C. & McIntosh, A. W. (1991) Metal Ecotoxicology Concepts and Application (Lewis, Chelsea, MI). 4. Adriano, D. C. (1992) Biogeochemistry of Trace Metal (I'wis, Chelsea, MI). 5. Iskandar, I. K. & Selim, H. M. (1992) Engineering Aspects of Metal-Waste Management (Lewis, Chelsea, MI). 6. Hamelink, J. L., Landrum, P. F., Bergman, H. L. & Benson, W. H. (1994) Biouvailability Physical, Chemical, and Biological Interac- tions (Lewis, Chelsea, MI). 7. Ernst, W. H. O. (1996) Appl. Geochem. 11, 163-167. 8. Davis, A., Sellstone, C., Clough, S., Barrick, R. & Yare, B. (1996) Appl. Geochem. 11, 409-423. 9. Davies, N. A., Taylor, M. G. & Simkiss, K. (1997) Environ. Pollut. 96, 179-184. 10. Peijnenburg, W. J. G. M., Posthuma, L., Eijsackers, H. J. P. & Allen, H. E. (1997) Ecotox. Environ. Saf 37, 163-172. 11. Lindsay, W. L., Vlek, P. L. G. & Chien, S. H. (1989) in Minerals in Soil Environments, eds. Dixon, J. B. & Weed, S. B. (Soil Sci. Soc. Am., Madison, WI), 2nd Ed., pp. 1089-1130. 12. Troeh, F. R. & Thompson, L. M. (1993) Soils and Soil Fertility (Oxford Univ. Press, New York). 13. Tisdale, S. L., Nelson, W. L., Beaton, J. D. & Havlin, J. L. (1993) Soil Fertility and Fertilizers (Macmillan, New York). 14. Lindsay, W. L. (1979) Chemical Equilibria in Soils (Wiley, New York), pp. 162-209. 15. Laws,E.A.(1993)AquaticPollution:AnIntroducto~yText(Wiley, New York). Lee, G. F., Jones, R. A. & Rast, W. (1980) in Phosphorous Management Strategies for Lakes, eds. Loehr, R. C., Martin, C. S. & Rast, W. (Ann Arbor Science, Ann Arbor, MI), pp. 259-308. Davis, A., Drexker, J. W., Ruby, M. V. & Nicholson, A. (1993) Environ. Sci. Technol. 27,1415-1425. Davis, A., Ruby, M. V., Bloom, M., Schoof, R., Freeman, G. & Bergstrom, P. D. (1996) Environ. Sci. Technol. 30, 392-399. Lasaga, A. C. (1998) Kinetic Theory in the Earth Sciences (Prince- ton Univ. Press, Princeton). Ruby, M. V., Davis, A. & Nicholson, A. (1994) Environ. Sci. Technol. 2'8, 646-654. Laperche, V., Traina, S. J., Gaddam, P. G. & Logan, T. J. (1996) Environ. Sci. Technol. 30, 3321-3326. Nriagu, J. O. (1972) Inorg Chem. 11, 2499-2503. Nriagu, J. O. (1973) Geochem. Cosmochim. Acta 37, 367-377. Nriagu, J. O. (1974) Geochem. Cosmochim. Acta 37, 367-377.

Colloquium Paper: Traina and Laperche 25. Santillan-Medrano, J. & Jurinak, J. J. (1975) Soil Sci. Soc. Am. Proc. 39, 851-858. 26. Sauve, S., McBride, M. B. & Hendershot, W. H. (1997) Environ. Pollut. 2, 149-155. Cotter-Howells, J. D. & Thornton, I. (1991) Environ. Geochem. Health 12, 127-135. 28. Cotter-Howells, J. D., Champness, P. E., Charnock, J. M. & Patrrick, R. A. D. (1994) J. Soil Sci. 45, 393-402. 29. Cotter-Howells, J. D. (1996) Environ. Pollut. 1, 9-16. 30. Rabinowitz, M. B. (1993) Bull. Environ. Contam. Toxicol. S1, 47 438-444. 31. Berti, W. R. & Cunningham, S. C. (1997) Environ. Sci. Technol. 31, 1359-1364. 32. Cotter-Howells, J. & Caporn, S. (1996) Appl. Geochem. 11, 335-342. 33. Ma, Q. Y., Traina, S. J., Logan, T. J. & Ryan, J. A. (1993) Environ. Sci. Technol. 27, 1803-1810. 34. Hughes, J. M., Cameron, M. & Crowley, K. D. (1989) Am. Mineral. 74, 870-876. 35. Santos, R. V. & Clayton, R. N. (1995)Am. Mineral. 80, 336-344. 36. Rakovan, J. & Reeder, R. J. (1994) Am. Mineral. 79, 892-903. 37. Suzuki, T., Hatsushika, T. & Hayakawa, Y. (1981) J. Chem. Faraday Trans. 177, 1059-1062. 38. Suzuki, T., Hatsushika, T. & Miyake, M. (1982) J. Chem. Soc. Faraday Trans. 1 78, 3605-3611. 39. Suzuki, T., Ishigaki, K. & Miyake, M. (1984) J. Chem. Soc. Faraday Trans. 1 80, 3157-3165. 40. Takeuchi, Y., Suzuki, T. & Arai, H. J. (1988) J. Chem. Eng. Jpn 21, 98-100. 41. Takouchi, & Arai, H. J. (1990) J. Chem. Eng Jpn 23, 75-80. Proc. Natl. Acad. Sci. USA 96 (1999J 3371 51. 52. 53. 54. 42. Ma, Q. Y., Logan, T. J. & Traina, S. J. (1994) Environ. Sci. Technol. 28, 408-419. 43. Ma, Q. Y., Traina, S. J. & Logan, T. J. (1994) Environ. Sci. Technol. 28, 1219-1228. 44. Xu, Y. & Schwartz, F. W (1994) J. Contam. Hydrol. 15, 187-206. 45. Xu, Y., Schwartz, F. W. & Traina, S. J. (1994) Environ. Sci. Technol. 28, 1472-1480. 46. Jeanjean, J., Rouchard, J. C., Tran, L. & Fedoroff, M. (1995) J. Radioanal. Nucl. Chem. Lett. 201, 529-539. Reichert, J. & Binner, J. G. P. (1996)J. Mater. Sci. 31, 1231-1241. 48. Chen, X., Wright, J. V., Conca, J. L. & Peurrung, L. M. (1997) Water Air Soil Pollut. 98, 57-78. 49. Chen, X., Wright, J. V., Conca, J. L. & Peurrung, L. M. (1997) Environ. Sci. Technol. 98, 624-631. 50. Lower, S. K., Maurice, P. A., Traina, S. J. & Carlson, E. H. (1998) Am. Mineral. 83, 147-158. Lower, S. K., Maurice, P. A. & Traina, S. J. (1998) Geochim. Cosmochim. Acta 62, 1773-1780. Laperche, V. & Traina, S. J. (1998) in Adsorption of Metals by Geomedia, ed. Jenne, E. A. (Academic, New York), pp. 255-276. Ma, Q. Y., Logan, T. J. & Traina, S. J. (1995) Environ. Sci. Technol. 29, 1118-1126. Zhang, P., Ryan, J. A. & Bryndzia, L. T. (1997) Environ. Sci. Technol. 31, 2673-2678. 55. ;~ Ma, L. Q. & Rao, G. N. (1997) J. Environ. Qual. 26, 788-794. 56. Ma, L. Q., Choate, A. L. & Rao, G. N. (1997) J. Environ. Qual. 26, 801-807. 57. Chlopeka, A. & Adriano, D. C. (1997) Sci. Total Environ. 207, 195-206. 58. Laperche, V., Logan, T. J., Gaddam, P. & Traina, S. J. (1997) Environ. Sci. Technol. 31, 2745-2753.

Next: Airborne Minerals and Related Aerosol Particles: Effects on Climate and the Environment »
(NAS Colloquium) Geology, Mineralogy, and Human Welfare Get This Book
×
MyNAP members save 10% online.
Login or Register to save!
  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  6. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  7. ×

    View our suggested citation for this chapter.

    « Back Next »
  8. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!