National Academies Press: OpenBook
« Previous: 4 Assessment of the IOF Approach
Suggested Citation:"References." National Research Council. 1999. Industrial Technology Assessments: An Evaluation of the Research Program of the Office of Industrial Technologies. Washington, DC: The National Academies Press. doi: 10.17226/9657.
×

References

ACS (American Chemical Society). 1996. Technology Vision 2020: The Chemical Industry, Washington, D.C.: The American Chemical Society.

AF&PA (American Forest and Paper Association). 1994. Agenda 2020: A Technology Vision and Research Agenda for America's Forest, Wood and Paper Industry. Washington, D.C.: American Forest and Paper Association.

AISI (American Iron and Steel Institute). 1995. Steel: A Natural Resource for the Future. Washington, D.C.: American Iron and Steel Institute.

AISI. 1997. Steel Technology Road Map. Washington, D.C.: American Iron and Steel Institute.

AISI. 1998. Steel Technology Road Map—Revised. Washington, D.C.: American Iron and Steel Institute. [Online]. Available: [http://www.steel.org/mt/roadmap/roadmap.htm [1999, June 4].

Aluminum Association. 1996. Aluminum Industry: Industry/Government Partnerships for the Future. Washington, D.C.: Aluminum Association, Inc.

Aluminum Association. 1997. Aluminum Industry Technology Roadmap. Washington, D.C.: Aluminum Association, Inc.

Aluminum Association. 1998. Inert Anode Roadmap: A Framework for Technology Development. Washington, D.C.: Aluminum Association, Inc.


Chum, H. 1997. Laboratory Coordinating Council. Presentation to the Committee on Industrial Technology Assessments, National Research Council, Washington, D.C., July 25, 1997.

CMC (Cast Metals Coalition). 1995. Beyond 2000: A Vision for the American Metalcasting Industry. North Charleston, S.C.: Cast Metals Coalition. [Online]. Available: [http://www.oit.doe.gov/IOF/glass/glassroad [1999, June 4].

CMC. 1998. Metalcasting Industry Roadmap. North Charleston, S.C.: Cast Metals Coalition. [Online]. Available: [http://www.oit.doe.gov/metalcast/roadmap.shtml [1999, June 4].

Suggested Citation:"References." National Research Council. 1999. Industrial Technology Assessments: An Evaluation of the Research Program of the Office of Industrial Technologies. Washington, DC: The National Academies Press. doi: 10.17226/9657.
×

CWRT (Center for Waste Reduction Technology). 1998. Vision 2020:1998 Separations Roadmap. New York: American Institute for Chemical Engineers.

Denman, G. 1996. Prioritizing Crosscutting Technology Development. Presentation to the Committee on Industrial Technology Assessments, National Research Council, Beckman Center, Irvine, California, September 19, 1996.

Doyle, F.J. 1998. Process Measurement and Control: Industry Needs. National Science Foundation workshop report. March 6–8, 1998. [Online]. Available: [http://fourier.che.udel.edu/~doyle/V2020/freport.html [1999, June 4].


Energetics. 1997. Report of the Glass Technology Road Map Workshop. Columbia, Md.: Energetics, Inc. [Online]. Available: [http://www.oit.doe.gov/IOF/glass/glassroadmap.html [1999, June 4].


Haynes, V.F. 1997. Vision 2020 Catalysis Report. Washington, D.C. The Council for Chemical Research. [Online]. Available: [http://www.ccrhq.org/v2020/catrep.html [1999, June 4].


LANL (Los Alamos National Laboratory). 1998. Computation Fluid Dynamics Technology Road Map. [Online]. Available: [http://www.lanl.gov/partnerships/cfdoc.html [1999, June 4].


Melymuka, K. 1998. GE's quality gamble: CEO Jack Welch is banking on a billion-dollar quality improvement campaign, and CIO Gary Reiner is leading it. Computerworld 32(23): 64–67 [Online]. Available:; http://www.computerworld.com/home/features.nsf/All/980608mgt2 [1999, June 4].

MTI (Materials Technology Institute). 1998. Technology Road Map for Materials of Construction, Operation and Maintenance in the Chemical Process Industries. [Online]. Available: [http://www.mti-link.org [1999, June 4].


NMA (National Mining Association). 1998a. The Future Begins with Mining, Washington, D.C.: National Mining Association. [Online]. Available: http://www.oit.doe.gov/mining/vision.shtml [1999, June 4].

NMA. 1998b. Mining Industry Roadmap for Crosscutting Technologies. National Mining Association Technology Committee. [Online]. Available: http://www.oit.doe.gov/mining/ccroadmap.shtml [1999, June 4].

NRC (National Research Council). 1997. Intermetallic Alloy Development: A Program Evaluation. Washington, D.C.: National Academy Press.

NRC. 1998. Manufacturing Process Controls for the Industries of the Future. Washington, D.C.: National Academy Press.

NRC. 1999. Separation Technologies for the Industries of the Future. Washington, D.C.: National Academy Press.


OIT (Office of Industrial Technologies). 1997a. Plant/Crop Based Renewable Resources 2020: A Vision to Enhance U.S. Economic Security Through Renewable Plant/Crop-Based Resource Use. National Corn Growers Association. Washington, D.C.: U.S. Department of Energy.

OIT. 1997b. Technology Partnerships. Washington, D.C.: U.S. Department of Energy.

OIT. 1998a. Strategic Plan. [Online]. Available: http://www.oit.doe.gov/About-OIT/strgplan.html [1999, June 4].

OIT. 1998b. Energy and Environmental Profile of the U.S. Petroleum Refining Industry. Washington, D.C.: U.S. Department of Energy.

Suggested Citation:"References." National Research Council. 1999. Industrial Technology Assessments: An Evaluation of the Research Program of the Office of Industrial Technologies. Washington, DC: The National Academies Press. doi: 10.17226/9657.
×

OIT. 1999. The Technology Road Map For Plant/Crop-Based Renewable Resources 2020: Research Priorities for Fulfilling a Vision to Enhance U.S. Economic Security Through Renewable Plant/Crop-Based Resource Use. Renewables Vision 2020 Steering Group. Washington, D.C.: U.S. Department of Energy .

PCAST (President's Committee of Advisors on Science and Technology). 1997. Federal Energy Research and Development for the Challenges of the 21st Century: Report of the Energy Research and Development Panel. Washington, D.C.: President's Committee of Advisors on Science and Technology.


TAPPI (Technical Association of the Pulp and Paper Industry). 1992. Paper Industry Research Needs. Workshop sponsored by TAPPI, Syracuse, New York, May 26–28, 1992.

TAPPI. 1996. Paper Industry Research Needs: Workshop, Sponsored by TAPPI, Raleigh, NC, April 22–24, 1996.


Wirth, J.P. 1996. Prioritizing Research Needs and Managing Innovation. Presentation to the Committee on Industrial Technology Assessments, National Research Council, Beckman Center, Irvine, California, September 19, 1996.

Suggested Citation:"References." National Research Council. 1999. Industrial Technology Assessments: An Evaluation of the Research Program of the Office of Industrial Technologies. Washington, DC: The National Academies Press. doi: 10.17226/9657.
×
Page 52
Suggested Citation:"References." National Research Council. 1999. Industrial Technology Assessments: An Evaluation of the Research Program of the Office of Industrial Technologies. Washington, DC: The National Academies Press. doi: 10.17226/9657.
×
Page 53
Suggested Citation:"References." National Research Council. 1999. Industrial Technology Assessments: An Evaluation of the Research Program of the Office of Industrial Technologies. Washington, DC: The National Academies Press. doi: 10.17226/9657.
×
Page 54
Next: Biographical Sketches of Committee Members »
Industrial Technology Assessments: An Evaluation of the Research Program of the Office of Industrial Technologies Get This Book
×
Buy Paperback | $29.00 Buy Ebook | $23.99
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

In 1993, the U.S. Department of Energy (DOE) Office of Industrial Technology (OIT) established a group of seven industries designated as Industries of the Future (IOF). These industries were selected for their high energy use and large waste generation. The original IOF included the aluminum, chemicals, forest products, glass, metalcasting, petroleum refining, and steel industries. Each industry was asked to provide a future vision and a road map detailing the research required to realize its vision. In November 1994, the forest products industry was the first of the IOF industries to enter into an agreement with DOE.

OIT asked the National Research Council's National Materials Advisory Board (NMAB) to provide guidance for OIT's transition to the new IOF strategy. The Committee on Industrial Technology Assessment (CITA) was formed for this purpose with the specific tasks of reviewing and evaluating the overall OIT program, reviewing selected OIT-sponsored research projects, and identifying crosscutting technologies (i.e., technologies applicable to more than one industry). CITA was asked to focus on three specific areas: intermetallic alloys, manufacturing process controls, and separations. A separate panel was formed to study each area and publish the results in separate reports.

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    Switch between the Original Pages, where you can read the report as it appeared in print, and Text Pages for the web version, where you can highlight and search the text.

    « Back Next »
  6. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  7. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  8. ×

    View our suggested citation for this chapter.

    « Back Next »
  9. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!