Skip to main content

Currently Skimming:


Pages 25-30

The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.


From page 25...
... For example, a luggage tag that finds its way on the apron surface can be immediately removed by the line crew, whereas a piece of metal that finds its way onto the runway, is another situation altogether. Furthermore, wildlife FOD may be removed by personnel different than the personnel that removes other types of debris, as a result of the oftentimes biohazard nature of wildlife FOD.
From page 26...
... A true mechanical broom sweeper can clean the surface of large debris, but dirt FIGURE 12 FOD removed during one FOD walk at Kadena Air Base, Japan. (Source: U.S.
From page 27...
... 27 and fine particulates may be remain on the surface and in pavement cracks. These units are typically used throughout the airfield on pavement surfaces, as well as on ramp areas where ground support equipment is staged.
From page 28...
... . Foreign Object Debris Storage Lastly, although not categorized as FOD removal equipment, containers for the purpose of storing collected FOD are beneficial for a FOD management program and the final step in the removal process.
From page 29...
... Figure 24 shows an example of FOD containers. CURRENT AIRPORT REMOVAL PRACTICES Common Foreign Object Debris Types To determine the most common types of debris removed at airports, this synthesis queried the airports.
From page 30...
... A vacuum set-up is also quite common, with magnetic bars also used by more than half of participating airports. Less common are jet air blowers, towbehind retention mesh, and rumble strips.


This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
More information on Chapter Skim is available.