Skip to main content

Linking the Construction Industry Electronic Operation and Maintenance Manuals: Workshop Summary (2000) / Chapter Skim
Currently Skimming:

Appendix D Naval Facilities Engineering Command Guide Specification 01781
Pages 46-59

The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.


From page 46...
... APPENDIX D Naval Facilities Engineering Command Guide Specification 01781
Read the entire page →
From page 47...
... 1.2.3.1 1.2.3.2 1.2.3.3 1.2.3.4 1.2.3.5 1.2.3.6 Corrective Maintenance Work-Hours 1.2.4 Appendices 1.2.4.1 1.2.4.2 1.2.4.3 1.2.4.4 1.2.4.5 Operating Instructions Safety Precautions Operator Prestart Startup, Shutdown, and Postshutdown Procedures Normal Operations Emergency Operations Operator Service Requirements Environmental Conditions Troubleshooting Guides and Diagnostic Techniques Wiring Diagrams and Control Diagrams Maintenance and Repair Procedures Removal and Replacement Instructions Snare Parts and Supply Lists Parts Identification Warranty Information Personnel Training Requirements Testing Equipment and Special Tool Information Contractor Information 1.3 SCHEDULE OF OPERATION AND MAINTENANCE DATA PACKAGES 1.3.1 Data Package 1 1.3.2 Data Package 2 1.3.3 Data Package 3 1.3.4 Data Package 4 1.3.5 Data Package 5 SECTION 01781 Page 1 47
Read the entire page →
From page 48...
... 48 APPENDIX D PART 2 PRODUCTS PART 3 ExEcurIoN End of Section Table of Contents SECTION 01781 Page 2
Read the entire page →
From page 49...
... * DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING COMMAND GUIDE SPECIFICATION Superseding NFGS-01781B (09/96)
Read the entire page →
From page 50...
... Refer to paragraph titled "Schedule of Operation and Maintenance Data Packages. n If the product is a ~package" system such as diesel electric generator, the supplier or manufacturer can also provide a manual or data that covers a complete system of interrelated components, including interconnecting wiring diagrams, narrative system control sequences, SECTION 01781 Page 4
Read the entire page →
From page 51...
... The technical sections should include a paragraph titled "SD-19, Operation and Maintenance Manuals," stating: "Submit Operation and Maintenance Data in accordance with Section 01781, "Operations and Maintenance Data," Data Package Al]
Read the entire page →
From page 52...
... 1.1.3 Package Content Data package content shall be as shown in the paragraph titled "Schedule of Operation and Maintenance Data Packages." For each product, system, or component piece of equipment requiring submission of O&M Data, submit the Data Package specified in the individual technical section. 1.1.4 Delivery Submit O&M Data Manuals to the Contracting Officer for review and acceptance; submit data specified for a given item within 30 calendar days after the item is delivered to the contract site.
Read the entire page →
From page 53...
... 1.2.1.3 Startup, Shutdown, and Postshutdown Procedures Provide narrative description for each operating procedure including control sequence for each. 1.2.1 4 Normal Operations Provide narrative description of normal operating procedures.
Read the entire page →
From page 54...
... _.2.2.2 Preventive Maintenance Plan and Schedule Include manufacturer's schedule for routine preventive maintenance, inspections, tests and adjustments required to ensure proper and economical operation and to minimize corrective maintenance and repair. Provide manufacturer's projection of preventive maintenance work-hours on a daily, weekly, monthly, and annual basis including craft requirements by type of craft.
Read the entire page →
From page 55...
... 1.2.4.4 Testing Equipment and Special Tool Information Include information on test equipment required to perform specified tests and on special tools needed for the operation, maintenance, and repair of components. 1.2.4.5 Contractor Information Provide a list that includes the name, address, and telephone number of the General Contractor and each subcontractor installing the product or equipment.
Read the entire page →
From page 56...
... Normal operations c. Environmental conditions d.
Read the entire page →
From page 57...
... Testing equipment and special tool information Contractor information 1.3.4 Data Package 4 a Safety precautions b. Operator prestart c.
Read the entire page →
From page 58...
... Environmental conditions h. Lubrication data J ~ Preventive maintenance plan and schedule Troubleshooting guides and diagnostic techniques Wiring diagrams and control diagrams 1.
Read the entire page →
From page 59...
... APPENDIX D Not used. PART 3 EXECUTION Not used.
Read the entire page →

Key Terms

  • data packages
  • maintenance data
  • corrective maintenance
  • preventive maintenance
  • control diagrams

  • paragraph titled
  • wiring diagrams
  • guide specification
  • service requirements
  • warranty information

  • technical sections
  • technical section
  • diagnostic techniques
  • troubleshooting guides
  • individual technical

  • special tool
  • operator service
  • information required
  • maintenance plan
  • tool information

  • repair procedures
  • testing equipment
  • contracting officer
  • items requiring
  • test equipment

  • minimize corrective
  • troubleshooting sequence
  • craft requirements
  • equipment required
  • technical guide


    • This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
    More information on Chapter Skim is available.